-
Tyton®Joint Pipe
Tyton® Joint Pipe: Simple. Sturdy. Reliable. The predominant gasket employed throughout the ductile iron pipe industry by several pipe manufacturers. Made of flexible and resistant rubber, the Tyton gasket provides a permanent watertight seal through radial compression provided by the pipe spigot within the finished joint.
Learn More -
TR Flex® Restrained Joint Pipe
Simply put, the most-widely accepted and installed integrally-cast restraint joint system in the ductile iron pipe industry. Proven as a versatile and easy-to-use item, this joint is flexible, sure, and watertight to and beyond its 350-psi pressure rating while preventing longitudinal separation of the joints whether installed above or below ground. TR Flex utilizes the Tyton joint gasket for a watertight seal along with a factory adapted spigot and extended bell casting to provide positive and permanent joint restraint.
Learn More -
Mechanical Joint Pipe
The "original" modern pipe joint, circa 1925; the mechanical joint remains in use primarily as a means for connecting fittings, valves, and similar appurtenances to a pipeline. The nuts, bolts, and gland featured in the joint provide a permanent watertight seal to 350 psi and more through a “stuffing box” compression of the gasket into its counterpart triangular recess of the joint.
Learn More -
Fabricated Flange & Wall Pipe
Fabricated pipe is made to custom lengths to meet specific project needs. Fabricated pipe can be cement, glass, or Protecto 401 lined to meet all applications. Exterior coatings available include standard Bituminous, Tnemec primers and epoxies, as well as other specialty coatings as required.
Learn More -
Ball & Socket Joint Pipe
All the best of Tyton or Fastite rubber-gasket sealed ductile iron pipe joints with triple the maximum deflection available from either. Designed and used in subaqueous installations where lateral forces and an unsure bury condition demand a strong yet flexible restraint joint piping system. 15-degrees of deflection per joint equates to a 4-1/2 foot available offset in every full length of pipe laid or launched.
Learn More
Piping
In addition to the benefits of long life, corrosion resistance, high structural strength, and tight joints, ductile iron pipe manufactured by McWane Ductile is also readily machinable, an important requirement in any pipe that must be drilled, tapped, or cut.
MPI has locations across the United States to have the pipe at the jobsite when you need it. Our comprehensive domestic and import ductile iron pipe, fabricated flange, & wall pipe offerings are made with a variety of joint combinations to meet your project needs.
MPI is proud to be a part of the McWane family of companies.